Step 1 – Access the Micro Switch
Most of the micro switches on EZGO golf carts including the EZGO TXT, EZGO RXV, and EZGO Express are located beneath the cart near the chassis. You have to unscrew the cover and access the switches.

Step 2 – Connect a Voltmeter
The micro switch will have two wires connected to it. You’ll need to connect a voltmeter to check the voltage on the supply side and the output side. Remove the wires from the micro switch terminals and connect the voltmeter after checking the polarity.

Step 3 – Check for Continuity
With the switch in its original position and in the alternate position, check the readings in the voltmeter from the micro switch. If the voltmeter reads continuity in either switch position, your micro switch is working fine and the problem may be with the connected component.

If the micro switch fails the continuity test, you’ll have to replace it.

Step 4 – Reset the Switch
Once the continuity test is completed, remove the voltmeter and connect the two wires back to the micro switch.

“Keyword”
“club car accelerator micro switch location”
“what does a micro switch do on a golf cart”
“how to replace ezgo accelerator micro switch”
“ezgo accelerator micro switch location”